1. Applications

The concentric cable is used as electric service entrance from the power distribution network until the meter panel (especially where it is required to prevent "black" losses or electric power robbery), and as feeder cable from the meters panel until the panel or general distribution panel, just as it is specified in the National Electrical Code.

This type of conductor can be used in dry and wet places, directly buried or outdoors; its maximum temperature of operation is 70?C(PVC or PE Insulation) or 90 篊(XLPE Insulation) and its voltage of service for all the applications is 600 V.

2. Specifications

2.1 Conductor: Copper or Aluminum or 8000 series Aluminum Alloy

2.2 Insulation: PVC or PE or XLPE

2.3 Concentric neutral: copper or Aluminum or 8000 series Aluminum Alloy

2.4 Sheath: PVC or PE or XLPE

8000 series Aluminum Alloy Concentric Cable 2x4+4AWG

Item	Description	Unit	Data
8000 series Aluminum Alloy Concentric Cable 2x4+4AWG
1	Phase Conductor
1.1	Number of phase cores		2
1.2	Material		8000 series Aluminum Alloy Conductor
1.3	Phase conductor cross-section	mm2/AWG	21.12/4
1.4	Strands number of conductor		7
1.5	Dia.of single wire	mm	1.96±0.02
2	Insulation
2.1	Material		Extrude XLPE cover on conductor
2.2	Nominal thickness	mm	1.14
3	Bedding
3.1	Material		Non-woven tape
4	Concentric conductor
4.1	Material		8000 series Aluminum Alloy Conductor
4.2	Cross-section	mm2/AWG	21.12/4
4.3	Strands number of conductor
4.4	Dia.of single wire	mm	1.23±0.01
5	Outer sheath
5.1	Material		PE
5.2	Nominal thickness	mm	1.14
6	Electrical specification
6.1	Voltage U0/U	V	600/1000
6.2	Test voltage	V	3500
6.3	Standard		Refer UL854